Mini Review - Paintwork Polish Enhancer
 

Mini Review - Paintwork Polish Enhancer
By Alowe

While waiting for a clients second coat of DGPS to cure, I decided to wash/clay/wash/strip/wax my ride.

Dwayne was nice to send me Wolfgangs PPE and Auto Bathe to try as I was having issues with Fuzion.

My car is taken care of very well, lets say OCD care. So I foamed with DP Xtreme foam, dwelled for 10 then rinces. Washed with ## citrus. Clayed with Megs white clay, rewashed same process. Dried and cracks blown out with 250 mph blower. Car was clean and squeaky. Clay did not pick up THAT much, due to car being polished in late May. I normally wash every week and use FK425 every other day, like I said OCD.

Applied PPE to a fresh out of the bag 6.5 CCS White pad. Did not prime or mist with anything. Just applied 3 nickel sized dots, dabbed a bit on the paint to spread, and went at it at 4.5 on the PC.

It was VERY easy to apply and in a minute or so started to go translucent. Did the whole car (VW GTI 4dr) in about 40 minutes. Waited about 10 minutes and buffed off. Easy on, easy off.

I thought my paint was clean after the process above, but take a look at the pad, I think it had a bit of dirt on the paint, what do you think?

Attachment 1131

Attachment 1132

Attachment 1133

Attachment 1134

After that a coat of DGPS was applied, cured for 1 hour and buffed off. Still need to apply another coat tomorrow, then a coat of Fuzion.

Attachment 1135

Attachment 1136

Attachment 1137

Attachment 1138

Attachment 1139

Attachment 1140

Attachment 1141

Attachment 1142

Attachment 1143

Attachment 1144

Attachment 1145

Let me know if you need anymore info on this wonderful product!

Thanks guys,