18" WHEEL WIDTH
DOES ANYONE KNOW HOW WIDE OF A18" WHEELYOU CANFIT ON AN 1986 944T. ALONG WITH THE BACK SPACINGSFOR FRONT AND REAR. I KNOW MY CAR HASA DIFFRENTBACK SPACING THAN THE 87'-MODELS. NOW I HAVE THE FACTORY 16X7 & 16X8 PHONE DIALS.
THANK YOU, RIDGWAY369 [&:] |
RE: 18" WHEEL WIDTH
Hi, I have a 944 S2, not a turbo, but my 18" wheels are 8" front, 10" rear. These fill the wheel arches perfectly and I don't have any problems with them fouling the bodywork.
It depends on the offset of the wheel to know if you are gonna need spacers. I hope this helps. What type/make of wheels are you thinking of fitting? |
RE: 18" WHEEL WIDTH
I WAS LOOKING AT A FEW DIFFRENT BRANDS AND TRYING TO DECIDE WHAT WIDTH I CAN USE ON THE 944T. I WANT TO GO AS WIDE AS POSSIBLE IN THE REAR AND STILL NOT HAVE TO WORRY ABOUT ANY RUBBING
|
RE: 18" WHEEL WIDTH
10 inch width wheels will fit just fine under the rear arches without any fouling of the bodywork, but I would say that without body modifications thats the limit. You must get the offset right & you may have to use spacers.
|
RE: 18" WHEEL WIDTH
You can get 11's to fit under the rear if you run a lot of negative camber.
|
All times are GMT -5. The time now is 04:43 PM. |
© 2024 MH Sub I, LLC dba Internet Brands