RE: 1987 944 S 2.5 16 Valve N/A will not start
 

I dont have the books on the Euro model, but you should have the hall sensor up front, not back there, could the sensor be in the wrong hole?

RE: 1987 944 S 2.5 16 Valve N/A will not start
 

No, no the hall sensor is up front, thats ok. The sensor you see ther is the reference sensor, I think.

I got this pic from clark's garage but it did not specify what model it reffers to, look like anything?


[IMG]local://upfiles/3736/86D22C670BF04C6693C206A18D142050.jpg[/IMG]

RE: 1987 944 S 2.5 16 Valve N/A will not start
 

Wiring diagram shows a couple of knock sensors, but I dont know where they go, or what happens when one is missing.

RE: 1987 944 S 2.5 16 Valve N/A will not start
 

That looks like the typical 8V setup.

RE: 1987 944 S 2.5 16 Valve N/A will not start
 

The Knock sensors are both on the side of the engine block, intact ok.

Oh that is KLOPFSENSOR's Knock sensor in German.

RE: 1987 944 S 2.5 16 Valve N/A will not start
 

If I wasnt so stubern I'd give up now and go back to my Toyota!

RE: 1987 944 S 2.5 16 Valve N/A will not start
 

Did you check the balast resistors for your fuel injectors?

RE: 1987 944 S 2.5 16 Valve N/A will not start
 

Hmm' no where are they and what will happen if they don't work or arn't there?

RE: 1987 944 S 2.5 16 Valve N/A will not start
 

Your injectors wont fire, or wont fire at the right time. would have a bad return side.

RE: 1987 944 S 2.5 16 Valve N/A will not start
 

Injectors are firing. Where are the resistors?

I can see them on the wiring diagram but I don't know where they are on the car.