AM/FM Radio
I just purchased a '98 Boxster and had it in for repairs. Just installed the radio face plate and it flashes "code". Does anyone know how to override this to get the radio/cd to work? Struggling with this, as I know of no code. It did not come with an owners' manual. Thanks.
|
RE: AM/FM Radio
You need your radio code.
Look for a silver plastic card that looks like a credit card. The code and serial number is on that. If that doesn't work (i.e. you can't find the card) then you'll need to get the serial number off the radio and contact either the dealer or becker usa. The dealer route will likely be the fastest. Check your manual to see if the code is written down somewhere in the book. Do you have a radio manual? Also look on the underside of the front hood. Frequently it is written there. Also, from another forum someone did this: How to Get Code from a Working Radio [hr] This may not help you out but I did this to get my serial number before the radio went into security mode Ignition ON Radio ON Locate the TP button PUSH and Hold for 30 Sec You will hear a BEEP BECKER will Show on the Screen Turn the Right Knob Until You see SER The Eight digit letter/number is the serial number for the CDC 220 Hope this helps someone __________________________________________________ ______ You don't want to re-code the radio, just obtain the code. If the dealership won't do it for free just contact becker usa with the serial number. You can also get info over at the Becker Board. Good Luck |
RE: AM/FM Radio
Thanks for that quick response! No I didn't get a radio manual or owner's manual with car. I will try these options. Appreciate this info!
|
RE: AM/FM Radio
Try Renntech forum
Here is the thread: http://www.renntech.org/forums/index...;hl=radio+code Loren will help you. Loren RennTech.org Also, Hold down the TP button for at least 10 seconds after you turn the radio on. "Becker 1" will be displayed. Rotate the right knob (slowly) and it will display the Becker model number. Then rotate it again and the serial number should be displayed on the radio. Write it down and post it on the thread and Loren will help you. Another option is to read more about the radio code: http://mike.focke.googlepages.com/radiocodes |
All times are GMT -5. The time now is 07:15 AM. |
© 2024 MH Sub I, LLC dba Internet Brands