Notices
General Tech Good at troubleshooting? Have a non specific issue? Discuss general tech topics here...

2001 911 carrera 4 cabriolet

Thread Tools
 
Search this Thread
 
  #1  
Old 08-02-2007, 08:22 PM
sburkes's Avatar
Thread Starter
Join Date: Aug 2007
Posts: 5
Default 2001 911 carrera 4 cabriolet

i have a 2001 carrera 4 cabriolet with a convertible top problem. it will not close elecronically. i have checked the fuse and it's good. i can almost close it manually (won't go the extra 2 inches!!) any thoughts?////

steve22[&:]
 
  #2  
Old 08-03-2007, 12:50 AM
Join Date: Aug 2007
Posts: 8
Default RE: 2001 911 carrera 4 cabriolet

Does it operate at all?
Is the deck lid open?
Is the e-brake light coming on?
Whats it saying on the instrument cluster ?Is the cab top light just flashing?

Moe
 
  #3  
Old 08-03-2007, 06:43 AM
Join Date: Feb 2007
Location:
Posts: 71
Default RE: 2001 911 carrera 4 cabriolet

Does it operate with the door lock? Is the parking brake indicator light on?
 
  #4  
Old 08-03-2007, 06:53 AM
sburkes's Avatar
Thread Starter
Join Date: Aug 2007
Posts: 5
Default RE: 2001 911 carrera 4 cabriolet-follow-up info

Here's more info....
The parking brake in on and light is lit.
The top can be moved manually-top and lid.
The top indicator light is lit for open top after engine is started.
That light remains light after the hard top is installed and secured.
The deck lid is secured.

thanks for the replies..
 
  #5  
Old 08-05-2007, 05:58 AM
sburkes's Avatar
Thread Starter
Join Date: Aug 2007
Posts: 5
Default RE: 2001 911 carrera 4 cabriolet-follow-up info

does anyone know the proper way to test the micro switches? ohm meter/voltmeter.
 
  #6  
Old 08-08-2007, 02:07 PM
Join Date: Aug 2007
Location:
Posts: 7
Default RE: 2001 911 carrera 4 cabriolet-follow-up info

check with both an ohm and volt meter
 
  #7  
Old 08-30-2010, 08:02 PM
gec19delta's Avatar
Junior Member
Join Date: Aug 2010
Posts: 1
Default Top issues

Porsche cabriolet tops goes down fine top comes up it latches then release and latches and release with no locking and rear windows dont roll up correct ? Well on the car side of the latching mech there is a mico switch that pushes in use a small screwdriver and push it it while the lock is engaged . If it locks then release and that is it . If swith is damaged then the unit needs to be replaced but if this repairs the issue there is a quick fix cut a piece of plastic use some epoxy glue and glue it to the plastic patel that attivate the micro switch
 
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
mikelb6
Private For Sale/Trade Classifieds
0
03-19-2008 11:56 PM
mikelb6
Private For Sale/Trade Classifieds
0
02-19-2008 10:01 PM
sburkes
General Tech
2
08-03-2007 01:03 PM
anthraciteboy
Porsche 911
0
11-12-2003 08:14 PM



Quick Reply: 2001 911 carrera 4 cabriolet



All times are GMT -5. The time now is 09:21 AM.